The Charnwood W030 Spindle Moulder

Fitting neatly into the gap between the heaviest router table and an industrial sized spindle moulder this machine is ideally suited to small professional workshops.
A precision ground cast iron table, a steel base cabinet and a 2hp induction motor are the basic ingredients which make up this fantastic new spindle moulder. The height of the spindle is controlled by the large hand wheel which can then be locked in position.
A simple belt change selects the correct speed for the tooling.
The body of the fence is cast iron with a dust outlet at the centre. The two wooden fence faces are adjustable to set the width of the opening, to suit the cutters being used. The outfeed fence can also be stepped out, controlled by a fine pitch thread adjuster, for operations where the complete edge of the workpiece is being removed. Fully adjustable guards are connected to a hinged plate which can quickly be lifted to allow clear access to change the tooling.
The sliding carriage consists of a cast iron table with four bearing guides running along an aluminium extrusion. The fence angle can be set accurately between 90 and 45 degrees with a useful stop to quickly return to 90 degrees again. A hold down clamp and a length stop complete the equipment

Options include:

Standard: - Rreceive a FREE Routing adaptor to allow 1/2" shank router bits to be used. Worth £49 !!
Supplied with sliding carriage, 100mm diameter extraction outlet, 4 adjustable height rubber feet, cable and plug.

Bundle 1: Save £80 when buying this package. The package consists of;
W030 Spindle Moulder with Sliding carriage
W030RC Routing Collet for Using 1/2 Shank Router Bits
CB9830 Cutterblock with Straight Knives and 6 Sets of Profile Knives
W030SD Sanding Drum Kit with 3 Sizes of Drum
Supplied with sliding carriage, 100mm diameter extraction outlet, 4 adjustable height rubber feet, cable and plug.

Bundle 2: Save over £90 when buying this package. The package consists of;
W030 Spindle Moulder with Sliding carriage
W030RC Routing Collet for Using 1/2 Shank Router Bits
CB9830 Cutterblock with Straight Knives and 6 Sets of Profile Knives
RCB8530: Rebate Block with Spur Cutters
W030SD Sanding Drum Kit with 3 Sizes of Drum
W520: Wheel Base
Supplied with sliding carriage, 100mm diameter extraction outlet, 4 adjustable height rubber feet, cable and plug.