Charnwood W715 10" Bench top Bandsaw

A bench top woodworking bandsaw with a 4'' cutting capacity. An ideal companion for woodturners. 

• Precision Ground Cast Iron Work Table
• Quick Lock Fence Rip Fence
• Quiet Induction Motor
• Crosscutting Mitre Guide Included
• 4'' Cutting Depth Capacity
• 10'' Cutting Width (Throat)
• Primarily used for Woodworking

A small sized woodworking bandsaw with a durable precision ground cast iron tilting table with a stop for returning to 90 degrees after a bevel cut and two mitre fence slots. The quick release fence locks onto both front and rear of the table to provide a rigid straight guide for ripping whilst the sliding mitre fence is adjustable for crosscutting wood at any angle. The new rack & pinion blade guard design can be adjusted single handed using a dial on the side of the machine and is fitted with a scale to set the cutting height. Two side guide bearings and a rear thrust bearing on the end of the guard, control the bandsaw blade and keep it true. Finished off with a durable powder coated paint finish.

Supplied with rip fence, mitre fence adjustable 60 degrees each way, 3/8" woodcutting blade, NVR switch, 60mm diameter extraction outlet, cable and plug.

Specification