This product was added to our catalog on Tuesday 04 August, 2009.

Charnwood W409 9'' Disc & Belt Sander

Product Images

Charnwood W409 9'' Disc & Belt Sander

Buying Information

Price including Vat £299.00

212 reward points

Add to Cart:

The Charnwood W409 9'' Disc & Belt Sander

Description

Large capacity disc and belt workshop sander. This new bigger model has a 1hp induction motor and plenty of power.

  • Quiet Induction Motor 750w
  • 9'' Diameter Sanding Disc
  • 6'' x 48'' Sanding belt
  • Belt can be used Horizontally or Vertically
  • Work Table Secured at Both Sides
  • 50mm Dust Extraction Outlet

A new modern style design has been achieved with our latest disc and belt sander. This combination sander has big capacities and plenty of power to perform a variety of workshop tasks.

The base houses a 1hp induction motor, which is connected via a strong V-belt to the drive shaft where the sanding disc is mounted. This design allows the speed of the disc to be restricted to 1800rpm which is ideal for sanding. A cast iron work table, fitted with a T-slot mitre guide, ensure accurate sanding of end grain and angled pieces. The sturdy table is hinged at both ends and can be lowered to any angle up to 45 degrees for sanding bevelled pieces.

The sanding belt can be use either horizontally or vertically. when using the belt in the upright position the work table can be moved from in front of the disc and refitted to the belt. Working in this manner gives a slightly bigger capacity of 150mm (6") for end grains.

As with any dust producing machinery, dust extraction should be carefully considered and we always recommend an extractor is used. For anybody not using a separate extractor the W409 has an integral powered fan which draws air from both the belt and the disc collector hoods, and expels it from the outlet. We include a cloth bag fitted with a quick action clamp to collect the dust.

A handy cable tidy completes the design for those times when you need to move the machine off the bench.

Supplied with 1 disc, 1 belt, NVR switch, mitre guide with a scale 60 degrees each way, 50mm dust extraction outlet, use optional W408DK to connect to a 100mm hose, fixing clamps for securing to a bench, rubber feet, cable and plug.

Specification

Sanding Table 170mm x 250mm
Table Tilt 90 to 45 Degrees
Disc Diameter 225mm (9'')
Disc Speed 1800rpm
Belt Size 150mm x 1219mm (6'' x 48'')
Belt Speed 6.9 metres / second
Motor (Induction) 750w
Dimensions (WxDxH) 700mm x 530mm x 360mm
Weight 35kg
Rating Hobby
Warranty 1 Year



This product was added to our catalog on Tuesday 04 August, 2009.


  • Model: W409
  • Shipping Weight: 35Kgs
  • 5 Units in Stock
  • Manufactured by: Charnwood

Your IP Address is: 54.162.250.227
Copyright © 2017 Homewood. Powered by Zen Cart
Footer banner